Productnumber:
750250
Corundum grinding stone
100 x 50 x 25 mm
Prices are hidden for your customer group
Corundum grinding stone
Corundum grinding stone for breaking new grinding belts.
Login
matching products
Base grinding belt
Prices are hidden for your customer group
200 x 1500 mm
The belt produces a high-quality result on side and base edges. The high-quality base and edge grinding belt convinces due to the controlled fracture behaviour of the abrasive grains, thus enabling to produce new grinding edges again and again.For usage in the Reichmann service robot SF-1.
Prices are hidden for your customer group
Tuning belt cork
Prices are hidden for your customer group
350 x 1500 mm
Ideally suitable for the Reichmann grinding machines PROFI 4 (VARIO), PROFI B (VARIO),SF-2/Pro, RS2000, SF-3 BS, CUB.This belt is used after tuning to obtain a fiber-free and smooth surface. Because of this, this belt is perfect for finishing.Recommendation: Use with high feed speed, slow belt speed and low feed weight.Warning: Provide adequate cooling and a slow belt speed. The correct concentration of the grinding additive is also very important. For measuring the concentration, a refractometer (item no. 1028145) is recommended, because the correct concentration of the grinding additive prevents the belt from sticking quickly and increases its service life.
Prices are hidden for your customer group
Ceramic belt
Prices are hidden for your customer group
30 x 910 mm
For Montana CRYSTAL ONE, CRYSTAL RACE, CRYSTAL EDGE, CHALLENGE, MODULAR 4, MSG 2000, CARVER (GHTT 2000), MAS 2000 GSW HTT.Ceramic side edge grinding belt for a longer service life and an even higher quality grinding result.With this grinding belt you increase your processing speed while improving the surface quality at the same time. This ceramic grinding belt also achieves economical grinding thanks to its continuous self-sharpening and its long service life. The self-sharpening effect is caused by the fact that in this ceramic grain fine aluminum oxide crystals are linked together. By breaking during the grinding process, these crystals are broken out, so that new sharp edges are created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
400 x 1600 mm
Base grinding belt for Tunejet, Microjet.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
150 x 2000 mm
Base grinding belt for Reichmann PROFI 1/2, TSM-E-Multi, DBM, USM-N/N2, TSM-N2-SV.Base grinding belt for Wintersteiger Micro 80/81/100, MCR 800/1500, SEL, MPS, Micro Twinstone, Micro-Jet-Center.For Sulzberg Compact, Compact 1000, Combi.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
150 x 1650 mm
Base grinding belt for Sulzberg Marni, Marni Super.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Base grinding belt
Prices are hidden for your customer group
150 x 2000 mm
The belt produces a high quality result on side and base edges. The high-quality base and edge grinding belt convinces due to the controlled fracture behaviour of the abrasive grains, thus enabling to produce new grinding edges again and again.For usage in the Reichmann grinding machines PROFI 1/2, TSM E-Multi, DBM, TSM-N2-SV.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
350 x 1500 mm
Base grinding belt for Reichmann PROFI 4 (VARIO), PROFI B (VARIO), SF-2/Pro, RS2000, SF-3 BS, CUB.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Side edge tuning belt
Prices are hidden for your customer group
20 x 1500 mm; G100
Side edge tuning belt for Wintersteiger MCR 800/1500, SEL, KNS, MPS.This belt ensures a finer surface and a grinding pattern with few grinding marks. In order to get a slightly hanging edge for the edge tuning, a grinding pass with a max. 60 shore contact roller is recommended.Recommendation: Please note that new tuning belts have to be broken more than base / edge sanding belts.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon side edge grinding belt
Prices are hidden for your customer group
20 x 1500 mm
Edge grinding belt for Wintersteiger MCR 800/1500, SEL, KNS, MPS.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Base grinding belt
Prices are hidden for your customer group
350 x 2000 mm
The belt produces a high-quality result on side and base edges. The high-quality base and edge grinding belt convinces due to the controlled fracture behaviour of the abrasive grains, thus enabling to produce new grinding edges again and again.For usage in the Reichmann grinding machines PROFI 1-3, PROFI B350, PROFI B Prof., MSR 350, TSM E-Multi 1/2, SN 350 PROFI.
Prices are hidden for your customer group
Base grinding belt
Prices are hidden for your customer group
300 x 2000 mm
The belt produces a high-quality result on side and base edges. The high-quality base and edge grinding belt convinces due to the controlled fracture behaviour of the abrasive grains, thus enabling to produce new grinding edges again and again.For usage in the Reichmann grinding machines SN 300, TSM E-Multi 1/2.
Prices are hidden for your customer group
Scotch belt
Prices are hidden for your customer group
350 x 1300 mm
For Wintersteiger SNB 60, Micro 71.This belt is the multi talent among the belts. It can deburr, polish and, in dry machining, cold wax. The belt is used in one operation and is therefore suitable for wet or dry processing. The enormous service life, low belt stretch and tear resistance result from the reinforced fiber fleece on the film base.Recommendation: To work on this belt, a low speed, high feed rate (if variable) and low contact pressure are necessary.Warning: You should ensure adequate cooling during wet machining. The correct concentration of the grinding additive is also very important. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Scotch belt
Prices are hidden for your customer group
350 x 2000 mm
Für Reichmann PROFI 1-3, SN 350 PROFI, PROFI B350, PROFI B Professional, TSM-E-Multi 1/2, MSR 350.Für Wintersteiger Sigma Eco/B/SBI, Micro 80/81/90/91/100, SNB 80, Micro 1/SB2, PUN 350+.Für Sulzberg Compact 2000/3000, Compact Belt.Für RoffB LM18BSG-R50, LM18R-R50, LM18S-R50.This belt is the multi talent among the belts. It can deburr, polish and, in dry machining, cold wax. The belt is used in one operation and is therefore suitable for wet or dry processing. The enormous service life, low belt stretch and tear resistance result from the reinforced fiber fleece on the film base.Recommendation: To work on this belt, a low speed, high feed rate (if variable) and low contact pressure are necessary.Warning: You should ensure adequate cooling during wet machining. The correct concentration of the grinding additive is also very important. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
350 x 2000 mm
Base grinding belt for Reichmann PROFI 1-3, SN 350 PROFI, PROFI B350, PROFI B Professional, TSM-E-Multi 1/2, MSR 350.Base grinding belt for Wintersteiger Sigma Eco/B/SBI, Micro 80/81/90/91/100, SNB 80, Micro 1/SB2, PUN 350+.For Sulzberg Compact 2000/3000, Compact Belt.For RoffB LM18BSG-R50, LM18R-R50, LM18S-R50.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Ceramic belt
Prices are hidden for your customer group
350 x 1500 mm
For Reichmann PROFI 4 (VARIO), PROFI B, PROFI B VARIO, SF-2 / Pro, RS2000, SF-3 BS, CUBThe continuous self-sharpening of this ceramic belt guarantees economical grinding thanks to a long service life. Please break the tape slightly before first use. Grain 80.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (Art.No. 66-105-000) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Tuning belt cork
Prices are hidden for your customer group
150 x 1500 mm
For Reichmann TSM-K.For Wintersteiger Total Tools ST/B, Trim 100/200.For Montana GMU 2000, M 2000 COMBI, M 2000.This belt is used after tuning to obtain a fiber-free and smooth surface. Because of this, this belt is perfect for finishing.Recommendation: Use with high feed speed, slow belt speed and low feed weight.Warning: Provide adequate cooling and a slow belt speed. The correct concentration of the grinding additive is also very important. For measuring the concentration, a refractometer (item no. 1028145) is recommended, because the correct concentration of the grinding additive prevents the belt from sticking quickly and increases its service life.
Prices are hidden for your customer group
Norzon side edge grinding belt
Prices are hidden for your customer group
30 x 628 mm
Edge grinding belt for KT Quattro.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon side edge grinding belt
Prices are hidden for your customer group
20 x 1200 mm
Edge grinding belt for Reichmann TSM, KSM, ESM, DKS, PROFI.For Wintersteiger GRINDRITE 21hundred, Microjet, SEG (Omega, Sigma, Micro, SNB), Sigma B, Sigma Eco, Trim 40, Trim B, Universal 350/Combi, PUN 350, PUN 350+.For all Sulzberg machines.For RoffB LM18BSG-R50, LM18S-R50, LRC35, LA14S-R30.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
350 x 1600 mm
Base grinding belt for Wintersteiger Mercury, Discovery 2 (from year 2012)This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Ceramic side edge belt
Prices are hidden for your customer group
30 x 1340 mm
For Montana BLUE PEARL, SAPHIR, SAPHIR PRO, CRYSTAL SPIRIT, SPIRIT 100, CRYSTAL DIAMOND, MODULAR ENERGY, SNOW CRUISER, MCS 2000, KSM MONTY.Ceramic side edge grinding belt for a longer service life and an even higher quality grinding result.With this grinding belt you increase your processing speed while improving the surface quality at the same time. This ceramic grinding belt also achieves economical grinding thanks to its continuous self-sharpening and its long service life. The self-sharpening effect is caused by the fact that in this ceramic grain fine aluminum oxide crystals are linked together. By breaking during the grinding process, these crystals are broken out, so that new sharp edges are created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Side edge tuning belt
Prices are hidden for your customer group
20 x 1200 mm; G100
Side edge tuning belt for Reichmann TSM, KSM, ESM, DKS, PROFI.For Wintersteiger GRINDRITE 21hundred, Microjet, SEG (Omega, Sigma, Micro, SNB), Sigma B, Sigma Eco, Trim 40, Trim B, Universal 350/Combi, PUN 350, PUN 350+.For all Sulzberg machine types.For RoffB LM18BSG-R50, LM18S-R50, LRC35, LA14S-R30.This belt ensures a finer surface and a grinding pattern with few grinding marks. In order to get a slightly hanging edge for the edge tuning, a grinding pass with a max. 60 shore contact roller is recommended.Recommendation: Please note that new tuning belts have to be broken more than base / edge sanding belts.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Scotch belt
Prices are hidden for your customer group
350 x 1935 mm
For Wintersteiger Discovery 1, Evolutiv 20/25, Evolutiv 40, Universal 350/Combi.This belt is the multi talent among the belts. It can deburr, polish and, in dry machining, cold wax. The belt is used in one operation and is therefore suitable for wet or dry processing. The enormous service life, low belt stretch and tear resistance result from the reinforced fiber fleece on the film base.Recommendation: To work on this belt, a low speed, high feed rate (if variable) and low contact pressure are necessary.Warning: You should ensure adequate cooling during wet machining. The correct concentration of the grinding additive is also very important. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
200 x 2000 mm
Base grinding belt for Reichmann TSM, TSM-N2, TSM-N2-SV.Base grinding belt for Wintersteiger GTR, TSMS-A, TSM, TSM-A.For Toko Combi Prof./StandardThis grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
345 x 1615 mm
Base grinding belt for Montana CRYSTAL SB COMBI, SNOWBOARD LC, MONTY BELT, CRYSTAL INLINE.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Side edge grinding belt
Prices are hidden for your customer group
30 x 1340 mm
Edge grinding belt for Montana BLUE PEARL, SAPHIR, SAPHIR PRO, CRYSTAL SPIRIT, SPIRIT 100, CRYSTAL DIAMOND, MODULAR ENERGY, SNOW CRUISER, MCS 2000, KSM MONTY.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
350 x 1300 mm
Base grinding belt for Wintersteiger SNB 60, Micro 71.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Base grinding belt
Prices are hidden for your customer group
350 x 1500 mm
The belt produces a high quality result on side and base edges. The high-quality base and edge grinding belt convinces due to the controlled fracture behavior of the abrasive grains, thus enabling to produce new grinding edges again and again.For usage in the Reichmann grinding machines PROFI 4 (VARIO), PROFI B, PROFI B VARIO, SF-2/Pro, RS2000, SF-3 BS, CUB.
Prices are hidden for your customer group
Tuning belt
Prices are hidden for your customer group
350 x 1935 mm; G100
For Wintersteiger Discovery 1, Evolutiv 20/25, Evolutiv 40, Universal 350/Combi.This belt ensures a finer surface and a grinding pattern with few grinding marks. In order to get a slightly hanging edge for the edge tuning, a grinding pass with a max. 60 shore contact roller is recommended.Recommendation: Please note that new tuning belts have to be broken more than base / edge grinding belts.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Ceramic belt
Prices are hidden for your customer group
350 x 2000 mm
For Reichmann PROFI 1-3, PROFI B350, PROFI B Prof., MSR 350, TSM E-Multi 1/2, SN 350 PROFI.For Wintersteiger Sigma Eco/B/SBI, Micro 80/81/90/91/100, SNB 80, Micro 1/SB/2, PUN 350+.For Sulzberg Compact 2000/3000, Compact Belt.For RoffB LM18BSG-R50, LM18R-R50, LM18S-R50.The continuous self-sharpening of this ceramic belt guarantees economical grinding thanks to long service life. Break tape slightly before first use. Grain 80.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Scotch belt
Prices are hidden for your customer group
150 x 2000 mm
Ideally suitable for the Reichmann grinding machines PROFI 1/2; TSM E-Multi, DBM, TSM-N2-SV.For Wintersteiger Micro 80/81/100, MCR 800/1500, SEL, MPS, Micro Twinstone, Micro-Jet-Center.For Sulzberg Compact, Compact 1000, Combi.This belt is the multi talent among the belts. It can deburr, polish and, in dry machining, cold wax. The belt is used in one operation and is therefore suitable for wet or dry processing. The enormous service life, low belt stretch and tear resistance result from the reinforced fiber fleece on the film base.Recommendation: To work on this belt, a low speed, high feed rate (if variable) and low contact pressure are necessary.Warning: You should ensure adequate cooling during wet machining. The correct concentration of the grinding additive is also very important. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
300 x 2000 mm
Base grinding belt for Reichmann SN 300, TSM E-Multi 1/2.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Tuning belt
Prices are hidden for your customer group
150 x 2000 mm; G100
For Reichmann PROFI 1/2, TSM E-Multi, DBM, USM-N/N2, TSM-N2-SV.For Wintersteiger Micro 80/81/100, MCR 800/1500, SEL, MPS, Micro Twinstone, Micro-Jet-Center.For Montana GMU 2000, M 2000 COMBI, M 2000.For Sulzberg Compact, Compact 1000, Combi.This belt ensures a finer surface and a grinding pattern with few grinding marks. In order to get a slightly hanging edge for the edge tuning, a grinding pass with a max. 60 shore contact roller is recommended.Recommendation: Please note that new tuning belts have to be broken more than base / edge grinding belts.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
350 x 1935 mm
Belagband für Wintersteiger Discovery 1, Evolutiv 20/25, Evolutiv 40, Universal 350/Combi.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Tuning belt cork
Prices are hidden for your customer group
350 x 1935 mm
For Wintersteiger Discovery 1, Evolutiv 20/25, Evolutiv 40, Universal 350/Combi.This belt is used after tuning to obtain a fiber-free and smooth surface. Because of this, this belt is perfect for finishing.Recommendation: Use with high feed speed, slow belt speed and low feed weight.Warning: Provide adequate cooling and a slow belt speed. The correct concentration of the grinding additive is also very important. For measuring the concentration, a refractometer (item no. 1028145) is recommended, because the correct concentration of the grinding additive prevents the belt from sticking quickly and increases its service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
150 x 630 mm
Base grinding belt for Sulzberg Marni Super.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Trizact belt
Prices are hidden for your customer group
350 x 2000 mm; G100
Suitable for the Reichmann grinding machines PROFI 1-3, SN 350 PROFI, PROFI B350, PROFI B Professional, TSM-E-Multi 1/2, MSR 350.For Wintersteiger Sigma Eco/B/SBI, Micro 80/81/90/91/100, SNB 80, Micro 1/SB2, PUN 350+.For Sulzberg Compact 2000/3000, Compact Belt.For RoffB LM18BSG-R50, LM18R-R50, LM18S-R50.This special grinding belt enables a fiber-free and even structure grinding and fine edge tuning thanks to its pyramid-shaped arrangement of grains. It also impresses with its long service life. The removal of this belt is less than that of a conventional tuning belts. Especially for snowboards, which are difficult to grind on a stone due to their convex or concave properties, this belt can be used for a high-quality final cut.Recommendation: To work on this belt, a low speed, high feed speed (if variable) and low contact pressure are necessary.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Scotch belt
Prices are hidden for your customer group
150 x 1500 mm
For Reichmann TSM-K.For Wintersteiger Total Tools ST/B, Trim 100/200.For Montana GMU 2000, M 2000 COMBI, M 2000.This belt is the multi talent among the belts. It can deburr, polish and, in dry machining, cold wax. The belt is used in one operation and is therefore suitable for wet or dry processing. The enormous service life, low belt stretch and tear resistance result from the reinforced fiber fleece on the film base.Recommendation: To work on this belt, a low speed, high feed rate (if variable) and low contact pressure are necessary.Warning: You should ensure adequate cooling during wet machining. The correct concentration of the grinding additive is also very important. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
150 x 1500 mm
Base grinding belt for Reichmann TSM-K.For Wintersteiger Total Tools ST / B, Trim 100/120.For Montana GMU 2000, M2000.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
Cork finish belt
Prices are hidden for your customer group
350 x 2000 mm
Ideally suitable for the Reichmann grinding machines PROFI 1-3, SN 350 PROFI, PROFIB350, PROFI B Professional, TSM-E-Multi 1/2, MSR 350.For Wintersteiger Sigma Eco/B/SBI, Micro 80/81/90/91/100, SNB 80, Micro 1/SB2, PUN 350+.For Sulzberg Compact 2000/3000, Compact Belt.For RoffB LM18BSG-R50, LM18R-R50, LM18S-R50.This belt is used after tuning to obtain a fiber-free and smooth surface. Because of this, this belt is perfect for finishing.Recommendation: Use with high feed speed, slow belt speed and low feed weight.Warning: Provide adequate cooling and a slow belt speed. The correct concentration of the grinding additive is also very important. For measuring the concentration, a refractometer (item no. 1028145) is recommended, because the correct concentration of the grinding additive prevents the belt from sticking quickly and increases its service life.
Prices are hidden for your customer group
Cork finish belt
Prices are hidden for your customer group
150 x 2000 mm
Ideally suitable for the Reichmann grinding machines PROFI 1/2; TSM E-Multi,DBM, TSM-N2-SV.For Wintersteiger Micro 80/81/100, MCR 800/1500.For Sulzberg Compact, Compact 1000, Combi.This belt is used after tuning to obtain a fiber-free and smooth surface. Because of this, this belt is perfect for finishing.Recommendation: Use with high feed speed, slow belt speed and low feed weight.Warning: Provide adequate cooling and a slow belt speed. The correct concentration of the grinding additive is also very important. For measuring the concentration, a refractometer (item no. 1028145) is recommended, because the correct concentration of the grinding additive prevents the belt from sticking quickly and increases its service life.
Prices are hidden for your customer group
