Base grinding belt
The belt produces a high quality result on side and base edges. The high-quality base and edge grinding belt convinces due to the controlled fracture behaviour of the abrasive grains, thus enabling to produce new grinding edges again and again.
For usage in the Reichmann grinding machines PROFI 1/2, TSM E-Multi, DBM, TSM-N2-SV.
For usage in the Reichmann grinding machines PROFI 1/2, TSM E-Multi, DBM, TSM-N2-SV.
| Application: | Base grinding belt |
|---|---|
| Grain: | 80 |
| Length: | 2000 mm |
| Width: | 150 mm |
Login
matching products
Cork finish belt
Prices are hidden for your customer group
150 x 2000 mm
Ideally suitable for the Reichmann grinding machines PROFI 1/2; TSM E-Multi,DBM, TSM-N2-SV.For Wintersteiger Micro 80/81/100, MCR 800/1500.For Sulzberg Compact, Compact 1000, Combi.This belt is used after tuning to obtain a fiber-free and smooth surface. Because of this, this belt is perfect for finishing.Recommendation: Use with high feed speed, slow belt speed and low feed weight.Warning: Provide adequate cooling and a slow belt speed. The correct concentration of the grinding additive is also very important. For measuring the concentration, a refractometer (item no. 1028145) is recommended, because the correct concentration of the grinding additive prevents the belt from sticking quickly and increases its service life.
Prices are hidden for your customer group
Hand refractometer
Prices are hidden for your customer group
for grinding emulsion
The hand refactometer measures the coolant mixing ratio and can save you a lot of coolant, repair costs and time. The refractometer value depends on the lubricant composition. (see safety data sheet)
Prices are hidden for your customer group
Corundum grinding stone
Prices are hidden for your customer group
100 x 50 x 25 mm
Corundum grinding stone for breaking new grinding belts.
Prices are hidden for your customer group
Scotch belt
Prices are hidden for your customer group
150 x 2000 mm
Ideally suitable for the Reichmann grinding machines PROFI 1/2; TSM E-Multi, DBM, TSM-N2-SV.For Wintersteiger Micro 80/81/100, MCR 800/1500, SEL, MPS, Micro Twinstone, Micro-Jet-Center.For Sulzberg Compact, Compact 1000, Combi.This belt is the multi talent among the belts. It can deburr, polish and, in dry machining, cold wax. The belt is used in one operation and is therefore suitable for wet or dry processing. The enormous service life, low belt stretch and tear resistance result from the reinforced fiber fleece on the film base.Recommendation: To work on this belt, a low speed, high feed rate (if variable) and low contact pressure are necessary.Warning: You should ensure adequate cooling during wet machining. The correct concentration of the grinding additive is also very important. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
