Productnumber:
1075410
Scotch belt
350 x 1300 mm
Prices are hidden for your customer group
Scotch belt
For Wintersteiger SNB 60, Micro 71.
This belt is the multi talent among the belts. It can deburr, polish and, in dry machining, cold wax. The belt is used in one operation and is therefore suitable for wet or dry processing. The enormous service life, low belt stretch and tear resistance result from the reinforced fiber fleece on the film base.
Recommendation: To work on this belt, a low speed, high feed rate (if variable) and low contact pressure are necessary.
Warning: You should ensure adequate cooling during wet machining. The correct concentration of the grinding additive is also very important. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
This belt is the multi talent among the belts. It can deburr, polish and, in dry machining, cold wax. The belt is used in one operation and is therefore suitable for wet or dry processing. The enormous service life, low belt stretch and tear resistance result from the reinforced fiber fleece on the film base.
Recommendation: To work on this belt, a low speed, high feed rate (if variable) and low contact pressure are necessary.
Warning: You should ensure adequate cooling during wet machining. The correct concentration of the grinding additive is also very important. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
| Application: | Scotch belt |
|---|---|
| Length: | 1300 mm |
| Width: | 350 mm |
Login
matching products
Hand refractometer
Prices are hidden for your customer group
for grinding emulsion
The hand refactometer measures the coolant mixing ratio and can save you a lot of coolant, repair costs and time. The refractometer value depends on the lubricant composition. (see safety data sheet)
Prices are hidden for your customer group
Corundum grinding stone
Prices are hidden for your customer group
100 x 50 x 25 mm
Corundum grinding stone for breaking new grinding belts.
Prices are hidden for your customer group
Norzon grinding belt
Prices are hidden for your customer group
350 x 1300 mm
Base grinding belt for Wintersteiger SNB 60, Micro 71.This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Prices are hidden for your customer group
