Norzon grinding belt
Base grinding belt for Reichmann PROFI 1/2, TSM-E-Multi, DBM, USM-N/N2, TSM-N2-SV.
Base grinding belt for Wintersteiger Micro 80/81/100, MCR 800/1500, SEL, MPS, Micro Twinstone, Micro-Jet-Center.
For Sulzberg Compact, Compact 1000, Combi.
This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.
Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.
Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
Base grinding belt for Wintersteiger Micro 80/81/100, MCR 800/1500, SEL, MPS, Micro Twinstone, Micro-Jet-Center.
For Sulzberg Compact, Compact 1000, Combi.
This grinding belt produces a good result on the base and edges and also impresses with its long service life. The high-quality Norzon® (zirconium) abrasive grain impresses thanks to its controlled breakage behavior, which means that new grinding edges can be created again and again.
Recommendation: Break the belt slightly before using it for the first time. The removal of the belt can be regulated with the speed.
Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking quickly and thus increases the service life.
| Application: | Norzon grinding belt |
|---|---|
| Grain: | 100 |
| Length: | 2000 mm |
| Width: | 150 mm |
Login
matching products
Scotch belt
Prices are hidden for your customer group
150 x 2000 mm
Ideally suitable for the Reichmann grinding machines PROFI 1/2; TSM E-Multi, DBM, TSM-N2-SV.For Wintersteiger Micro 80/81/100, MCR 800/1500, SEL, MPS, Micro Twinstone, Micro-Jet-Center.For Sulzberg Compact, Compact 1000, Combi.This belt is the multi talent among the belts. It can deburr, polish and, in dry machining, cold wax. The belt is used in one operation and is therefore suitable for wet or dry processing. The enormous service life, low belt stretch and tear resistance result from the reinforced fiber fleece on the film base.Recommendation: To work on this belt, a low speed, high feed rate (if variable) and low contact pressure are necessary.Warning: You should ensure adequate cooling during wet machining. The correct concentration of the grinding additive is also very important. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Cork finish belt
Prices are hidden for your customer group
150 x 2000 mm
Ideally suitable for the Reichmann grinding machines PROFI 1/2; TSM E-Multi,DBM, TSM-N2-SV.For Wintersteiger Micro 80/81/100, MCR 800/1500.For Sulzberg Compact, Compact 1000, Combi.This belt is used after tuning to obtain a fiber-free and smooth surface. Because of this, this belt is perfect for finishing.Recommendation: Use with high feed speed, slow belt speed and low feed weight.Warning: Provide adequate cooling and a slow belt speed. The correct concentration of the grinding additive is also very important. For measuring the concentration, a refractometer (item no. 1028145) is recommended, because the correct concentration of the grinding additive prevents the belt from sticking quickly and increases its service life.
Prices are hidden for your customer group
Tuning belt
Prices are hidden for your customer group
150 x 2000 mm; G100
For Reichmann PROFI 1/2, TSM E-Multi, DBM, USM-N/N2, TSM-N2-SV.For Wintersteiger Micro 80/81/100, MCR 800/1500, SEL, MPS, Micro Twinstone, Micro-Jet-Center.For Montana GMU 2000, M 2000 COMBI, M 2000.For Sulzberg Compact, Compact 1000, Combi.This belt ensures a finer surface and a grinding pattern with few grinding marks. In order to get a slightly hanging edge for the edge tuning, a grinding pass with a max. 60 shore contact roller is recommended.Recommendation: Please note that new tuning belts have to be broken more than base / edge grinding belts.Warning: Ensure sufficient cooling and the correct concentration of the grinding additive. A refractometer (item no. 1028145) is recommended for measuring the concentration, because the correct concentration of the grinding additive prevents the belt from sticking together quickly and thus increases the service life.
Prices are hidden for your customer group
Waxing and polishing belt
Prices are hidden for your customer group
150 x 2000 mm
For Reichmann PROFI 1/2, TSM-E-Multi, DBM, USM-N/N2, TSM-N2-SVFor Wintersteiger Micro 80/81/100, MCR 800/1500, SEL, MPS, Micro Twinstone, Micro-Jet-Center.For Sulzberg Compact, Compact 1000, Combi.This belt is used purely for polishing and waxing. By applying the optimal, thin wax film, there is less need to brush out and thus guarantee more economical waxing. The corundum or silicon carbide abrasive grain is firmly anchored to an elastic nylon fiber base on these belts with the aid of a synthetic resin bond.Recommendation: Use a slow belt speed and low contact pressure.
Prices are hidden for your customer group
Corundum grinding stone
Prices are hidden for your customer group
100 x 50 x 25 mm
Corundum grinding stone for breaking new grinding belts.
Prices are hidden for your customer group
